Miter Saw Station

Now that I had organized my shop space and also have a workbench to work, is the turn to build my miter saw station. This station was a huge success, since until today is the place where a lot of my actual projects begins.

First step was create the legs for each section using pocket holes. I repeat the same until I get all the legs ready.

Then connect the legs to get a basic structure.

After that, was very simple to put all together.

The shop floor was no level at all, so I use some adjustable leveling feet.

After cut the plywood for the top, was time to use the router to make space for the tracks channels.

I added a shellac cover on the top to add a little bit of protection.

Toke me a while to get the right position to keep at the same level the top of the station with the surface of the saw. Finally, here is an image of the final station. You also can see the stop blocks on each side.

UPDATE (01/14/21):

I added a box to control a little bit the dust and also a battery/charging station.